Builders Hardware

Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps...

Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation no nails needed. Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association. 20-gauge galvanized steel. No. PSCL 1/2: Size: 1/2 In. Material: Galvanized Steel Gauge: 20 ga Pkg Qty: 1 No. PSCL 15/32:...

Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps...

Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation no nails needed. Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association. 20-gauge galvanized steel. No. PSCL 1/2: Size: 1/2 In. Material: Galvanized Steel Gauge: 20 ga Pkg Qty: 1 No. PSCL 15/32:...

Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps...

Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation no nails needed. Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association. 20-gauge galvanized steel. No. PSCL 1/2: Size: 1/2 In. Material: Galvanized Steel Gauge: 20 ga Pkg Qty: 1 No. PSCL 15/32:...

Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps...

Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation no nails needed. Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association. 20-gauge galvanized steel. No. PSCL 1/2: Size: 1/2 In. Material: Galvanized Steel Gauge: 20 ga Pkg Qty: 1 No. PSCL 15/32:...

These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift...

These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift load capacity. ZMAX galvanized steel. No. LPC4Z: Size: 4 In. x 4 In. Gauge: 18 ga Finish: Z-Max Material: Steel Type: Adjustable Pkg Qty: 1 No. LPC6Z: Size: 6 In. x 6 In. Gauge: 16 ga Finish: Galvanized Material: Steel Dimensions: 5-9/16" W x 5-1/2" L Type: Adjustable Install With: 8-10d hot-dip...

These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift...

These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift load capacity. ZMAX galvanized steel. No. LPC4Z: Size: 4 In. x 4 In. Gauge: 18 ga Finish: Z-Max Material: Steel Type: Adjustable Pkg Qty: 1 No. LPC6Z: Size: 6 In. x 6 In. Gauge: 16 ga Finish: Galvanized Material: Steel Dimensions: 5-9/16" W x 5-1/2" L Type: Adjustable Install With: 8-10d hot-dip...

The PC cap provides a custom connection for post-beam combinations at medium design loads. Miminum 4x4 post size. Do not install bolts into pilot holes. 16-gauge galvanized steel. Also available...

The PC cap provides a custom connection for post-beam combinations at medium design loads. Miminum 4x4 post size. Do not install bolts into pilot holes. 16-gauge galvanized steel. Also available with ZMAX coating. No. PC4Z: Size: 4 In. x 4 In. Gauge: 16 ga Finish: Galvanized Material: Steel Dimensions: 3-9/16" W x 3-9/16" W x 2-5/8" L x 1" L Type: Post Install With: 14-16d fasteners Pkg Qty: 1 No. PC6Z: Size: 6 In. x 6 In. Gauge: 16 ga Finish: Galvanized Material: Steel Dimensions: 3-9/16" W x...

The PC cap provides a custom connection for post-beam combinations at medium design loads. Miminum 4x4 post size. Do not install bolts into pilot holes. 16-gauge galvanized steel. Also available...

The PC cap provides a custom connection for post-beam combinations at medium design loads. Miminum 4x4 post size. Do not install bolts into pilot holes. 16-gauge galvanized steel. Also available with ZMAX coating. No. PC4Z: Size: 4 In. x 4 In. Gauge: 16 ga Finish: Galvanized Material: Steel Dimensions: 3-9/16" W x 3-9/16" W x 2-5/8" L x 1" L Type: Post Install With: 14-16d fasteners Pkg Qty: 1 No. PC6Z: Size: 6 In. x 6 In. Gauge: 16 ga Finish: Galvanized Material: Steel Dimensions: 3-9/16" W x...

These protective plates meet IBC IRC UBC and City of Los Angeles code requirements for HVAC and pipes in walls. It protects pipes from nails piercing them. The PSPN516Z meets structural and...

These protective plates meet IBC IRC UBC and City of Los Angeles code requirements for HVAC and pipes in walls. It protects pipes from nails piercing them. The PSPN516Z meets structural and protection requirements with 1 strap. Install with 16d common hot dip galvanized nails. 16-gauge galvanized steel. Some sizes available in ZMAX coating. No. PSPN58Z: Size: 5 In. W x 8 In. L Material: Steel Gauge: 16 ga Finish: Z-Max Pkg Qty: 1

These protective plates meet IBC IRC UBC and City of Los Angeles code requirements for HVAC and pipes in walls. It protects pipes from nails piercing them. The PSPN516Z meets structural and...

These protective plates meet IBC IRC UBC and City of Los Angeles code requirements for HVAC and pipes in walls. It protects pipes from nails piercing them. The PSPN516Z meets structural and protection requirements with 1 strap. Install with 16d common hot dip galvanized nails. 16-gauge galvanized steel. Some sizes available in ZMAX coating. No. PSPN58Z: Size: 5 In. W x 8 In. L Material: Steel Gauge: 16 ga Finish: Z-Max Pkg Qty: 1

An economical alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid-sawn rafters the unique design enables the hanger to be installed either...

An economical alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid-sawn rafters the unique design enables the hanger to be installed either before or after the rafter is in place. Maximum C1 force (compressive force applied over end post). No. LRU26Z: Size: 1-9/16" W x 5-1/4" H x 1-15/16" B Material: Steel Gauge: 18 ga Finish: Z-Max Install With: Face 4-10d Joist 5-10d Maximum C1 Force: 1-3/4 In. Pkg Qty: 1 No. LRU28Z: Size: 1-9/16" W x...

An economical alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid-sawn rafters the unique design enables the hanger to be installed either...

An economical alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid-sawn rafters the unique design enables the hanger to be installed either before or after the rafter is in place. Maximum C1 force (compressive force applied over end post). No. LRU28Z: Size: 1-9/16" W x 6-15/16" H x 1-15/16" B Material: Steel Gauge: 18 ga Finish: Z-Max Install With: Face 6-10d Joist 5-10d Maximum C1 Force: 2-5/8 In. Pkg Qty: 1