Paint

Simpson Strong-Tie acrylic adhesive delivers consistent performance for high-strength anchor grouting in a wide range of weather conditions. Our acrylic formulations cure fast and are suitable for...

Simpson Strong-Tie acrylic adhesive delivers consistent performance for high-strength anchor grouting in a wide range of weather conditions. Our acrylic formulations cure fast and are suitable for damp wet or water-filled holes. AT-XP is a fast-curing anchoring adhesive for cracked and uncracked concrete. It has been formulated for high-strength anchorage of threaded rod and rebar into concrete under a wide range of conditions. AT-XP adhesive dispenses easily in cold or warm environments with...

Simpson Strong-Tie Acrylic-Tie Mixing Nozzle

Simpson Strong-Tie Acrylic-Tie Mixing Nozzle

This manual dispensing tool has been designed to work with Epoxy-Tie 22 oz. cartridges for trouble-free dispensing. Features a steel body for ultimate strength and light weight. The handle is...

This manual dispensing tool has been designed to work with Epoxy-Tie 22 oz. cartridges for trouble-free dispensing. Features a steel body for ultimate strength and light weight. The handle is positioned under the cartridge for balance and ease of use. The drive mechanism is released by pushing forward on the drive handle. Cartridges snap-lock into position. No. EDT22S: Material: Steel Pkg Qty: 1

Simpson Strong-Tie Epoxy Adhesive

Simpson Strong-Tie Epoxy Adhesive

ET-3G is a two-component high-solids epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). ET-3G has a...

ET-3G is a two-component high-solids epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). ET-3G has a long working time - 50 min at 70F (21C) and can be applied in dry or damp conditions. The adhesive is a teal color when mixed properly and has a substrate installation temperature range from 50F (10C) to 110F (43C). Simpson Strong-Tie epoxy anchors for concrete and masonry are rigorously tested to...

SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio two-component anchoring adhesive formulated for anchoring threaded rod and...

SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio two-component anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40F (4C) to 100F (38C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is...

Designed for the proper proportioning and mixing of different adhesive formulations. Use only appropriate Simpson Strong-Tie mixing nozzle in accordance to instructions. Modification or improper use...

Designed for the proper proportioning and mixing of different adhesive formulations. Use only appropriate Simpson Strong-Tie mixing nozzle in accordance to instructions. Modification or improper use of mixing nozzle may impair epoxy or acrylic performance. This 18-element mixing nozzle is for use with 22 oz. and 56 oz. Epoxy-Tie cartridges and the 30 oz. AT Acrylic-Tie adhesive cartridge. This is a 1-piece nozzle with integrated nut (separate retaining nut not required). No. EMN22I: Usable...

Simpson Strong-Tie makes dispensing adhesives easier than ever by providing a variety of manual and pneumatic tools as well as accessories designed to make dispensing adhesive as efficient as...

Simpson Strong-Tie makes dispensing adhesives easier than ever by providing a variety of manual and pneumatic tools as well as accessories designed to make dispensing adhesive as efficient as possible. Brushes are used for cleaning drilled holes prior to adhesive anchor installation. The brush is made for use in conjunction with Simpson Strong-Tie adhesives. No. ETB6: Brush Diameter (In.): 0.75 Brush Length (In.): 4 Total Length (In.): 16 Pkg Qty: 1

An exclusive nonskid compound formulated for easy mixing and application. Use in any floor paint on any area a slip-resistant surface is desired. Ideal for marine use pool decks patios floors stairs...

An exclusive nonskid compound formulated for easy mixing and application. Use in any floor paint on any area a slip-resistant surface is desired. Ideal for marine use pool decks patios floors stairs ramps showers and washrooms. Add any amount to achieve the desired results. No. 22242: Container Size: 1 Lb. Color: Clear Interior/Exterior: Interior/Exterior Pkg Qty: 1 Package Type: Bottle

Soudafoam 5 Oz. Trip Expansion One Shot Compact Spray Foam Insulation

Soudafoam 5 Oz. Trip Expansion One Shot Compact Spray Foam Insulation

Soudafoam Door & Window Foam Sealant

Soudafoam Door & Window Foam Sealant

Soudafoam Gap Fill Foam Sealant

Soudafoam Gap Fill Foam Sealant