Cancel
Account
My Items
My Cart
OR
Filter
Sort By
Used to reinforce angle connections. Field adjustable (skewable) 0 deg. to 135 deg. angles. Bend 1 time only. Shipped at 45 deg. angle. 18-gauge galvanized steel. Also available with ZMAX coating....
Used to reinforce angle connections. Field adjustable (skewable) 0 deg. to 135 deg. angles. Bend 1 time only. Shipped at 45 deg. angle. 18-gauge galvanized steel. Also available with ZMAX coating. No. LS30: Material: Galvanized Steel Size: 3-3/8 In. L Gauge: 18 ga Finish: Galvanized Install With: 6-10d fasteners Pkg Qty: 1 No. LS50Z: Material: Galvanized Steel Size: 4-7/8 In. L Gauge: 18 ga Finish: Z-Max Install With: 8-10d fasteners Pkg Qty: 1 No. LS70Z: Material: Galvanized Steel Size: 6-3/8...
Simpson Strong-Tie Galvanized Hurricane Tie
The staggered nail pattern accommodates 2x8 and 2x10 joists. Use just 2 of the 6 nail holes at each end. Tension bridging works only in tension so must be used in cross pairs. Install bridging...
The staggered nail pattern accommodates 2x8 and 2x10 joists. Use just 2 of the 6 nail holes at each end. Tension bridging works only in tension so must be used in cross pairs. Install bridging tightly; loose installation may allow floor movement. Requires (2) 6d commons per end. 22-gauge galvanized steel. No. LTB20: Length: 19-1/2 In. Material: Steel Finish: Galvanized Gauge: 22 Joist Size: 2 In. x 8 In. & 2 In. x 10 In. Pkg Qty: 1
Attaches the bottom chord of a truss or rafter at pitches from 0:12 to 4:12 to double 2x4 top plates. Double shear nailing allows for higher lateral resistance. Installs with 8-8d x 1-1/2" and 2-8d...
Attaches the bottom chord of a truss or rafter at pitches from 0:12 to 4:12 to double 2x4 top plates. Double shear nailing allows for higher lateral resistance. Installs with 8-8d x 1-1/2" and 2-8d slant nails to rafters and 8-8d nails to plates. 18-gauge galvanized steel. No. HS24: Material: Galvanized Steel Gauge: 18 Finish: Galvanized Pkg Qty: 1
These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift...
These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift load capacity. 18-gauge galvanized steel. Some sizes available with ZMAX coating. No. AC4: Size: 4 In. x 4 In. Gauge: 18 ga Finish: Galvanized Material: Steel Dimensions: 3-9/16" W x 6-1/2" L Type: Twin Install With: 12-16d HDG fastner beam & 8-16d HDG post Pkg Qty: 1 No. AC4Z: Size: 4 In. x 4 In....
These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift load capacity. 18-gauge galvanized steel. Some sizes available with ZMAX coating. No. AC4Z: Size: 4 In. x 4 In. Gauge: 18 ga Finish: Z-Max Material: Steel Dimensions: 3-9/16" W x 6-1/2" L Type: Post Install With: 12-16d HDG fastner beam & 8-16d HDG post Pkg Qty: 1