Cancel
Account
My Items
My Cart
OR
Filter
Sort By
A great base for installing a 4x4 post on an existing concrete slab. This attractive post base will hold a 4x4 post securely in place. Base installs with Simpson 8-1/4" SDS double-barrier coat or...
A great base for installing a 4x4 post on an existing concrete slab. This attractive post base will hold a 4x4 post securely in place. Base installs with Simpson 8-1/4" SDS double-barrier coat or hot-dip galvanized lag screws. 12-gauge black powder-coated finish steel for corrosion resistance. No. FPBB44: Size: 4 In. x 4 In. Gauge: 12 ga Finish: Black Powder Coat Material: Steel Type: E-Z Base Install With: Simpson 8-1/4 In SDS double-barrier coat Pkg Qty: 1
The EPB series provides a connection between a post (or column) for decks patio covers and other top-supported structures. Added standoff adjustability to suit a variety of applications. Install in...
The EPB series provides a connection between a post (or column) for decks patio covers and other top-supported structures. Added standoff adjustability to suit a variety of applications. Install in wet concrete. Simpson Strong-Tie elevated base plate allows 1 In. to 2-1/2 In. clearance above concrete. 12-gauge base plate 1-1/16 In. O.D. x 8 In. or 12 In. pipe. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non...
The EPC cap provides a custom connection for post-beam combinations at medium design loads. Minimum 4x4 post size. 3-9/16" W1 x 3-9/16" W2 x 2-5/8" L1 x 11" L2 x 7-5/16" L3. Use 16d fasteners. Do...
The EPC cap provides a custom connection for post-beam combinations at medium design loads. Minimum 4x4 post size. 3-9/16" W1 x 3-9/16" W2 x 2-5/8" L1 x 11" L2 x 7-5/16" L3. Use 16d fasteners. Do not install bolts into pilot holes. 16-gauge galvanized steel. No. EPC4Z: Size: 4 In. x 4 In. Gauge: 16 ga Finish: Galvanized Material: Steel Dimensions: 3-9/16" W x 3-9/16" W x 2-5/8" L x 11" L Type: End Install With: 16d fasteners Pkg Qty: 1 No. EPC6Z: Size: 6x Gauge: 16 ga Finish: Galvanized...
Simpson Strong-Tie Face Mount Concealed Flange Joist Hanger with Screws
Simpson Strong-Tie Face Mount Joist Hanger
The UFP (Universal Foundation Plate) provides a retrofit method to anchor the mudsill to the side of the foundation in applications where minimum vertical clearance exists. Also designed to perform...
The UFP (Universal Foundation Plate) provides a retrofit method to anchor the mudsill to the side of the foundation in applications where minimum vertical clearance exists. Also designed to perform when the mudsill is offset from the foundation up to 2-1/2" or extended beyond the foundation up to 1/2". May be used in place of the FA HFA and FAP connectors. Galvanized for extra corrosion resistance. Install with 1/4" x 3" StrongDrive SDS screws and 1/2" diameter anchor bolts. Screws not...
Used to reinforce angle connections. Field adjustable (skewable) 0 deg. to 135 deg. angles. Bend 1 time only. Shipped at 45 deg. angle. 18-gauge galvanized steel. Also available with ZMAX coating....
Used to reinforce angle connections. Field adjustable (skewable) 0 deg. to 135 deg. angles. Bend 1 time only. Shipped at 45 deg. angle. 18-gauge galvanized steel. Also available with ZMAX coating. No. LS30: Material: Galvanized Steel Size: 3-3/8 In. L Gauge: 18 ga Finish: Galvanized Install With: 6-10d fasteners Pkg Qty: 1 No. LS50Z: Material: Galvanized Steel Size: 4-7/8 In. L Gauge: 18 ga Finish: Z-Max Install With: 8-10d fasteners Pkg Qty: 1 No. LS70Z: Material: Galvanized Steel Size: 6-3/8...