Cancel
Account
My Items
My Cart
OR
Simpson Strong-Tie Titen Turbo Zinc Concrete & Masonry Anchors
The TSBR2-24 is an innovative product that meets or exceeds current lateral bracing methods. Resists tension and compression loads equal to or greater than BCSI-03 prescriptive requirements. Does...
The TSBR2-24 is an innovative product that meets or exceeds current lateral bracing methods. Resists tension and compression loads equal to or greater than BCSI-03 prescriptive requirements. Does not require any field modification prior to installation. Has a low profile that can be sheathed over when used as erection bracing eliminating the need to remove bracing prior to sheathing. Install with (4) 10d x 1-1/2" nails. 25-1/2" L. x 3-1/2" W. x 2" D. 22-gauge galvanized steel. No. TSBR2-24:...
The TSF is a fast and accurate method for spacing trusses that eliminates layout marking of top plates and can be left in place under the sheathing. These truss spacers do not provide bracing of any...
The TSF is a fast and accurate method for spacing trusses that eliminates layout marking of top plates and can be left in place under the sheathing. These truss spacers do not provide bracing of any kind and are not structural members they are for spacing only. 1-1/2" W. x 10' L. For 24" on-center spacing. 24-gauge galvanized steel. No. TSF2-24: Width: 1-1/2 In. Height: 10 In. Material: Steel Finish: Galvanized Gauge: 24 Pkg Qty: 1
The standard U hanger provides flexibility of joist to header installation. Versatile fastener selection with tested allowable loads. 16-gauge galvanized steel. No. U46: Material: Steel Gauge: 16...
The standard U hanger provides flexibility of joist to header installation. Versatile fastener selection with tested allowable loads. 16-gauge galvanized steel. No. U46: Material: Steel Gauge: 16 Joist Size: 4 In. x 6 In. Type: Face Mount Finish: Galvanized Install With: 8-10d or 8-16d in header 4-10d in joist Width (In.): 3.5625 Height (In.): 4.875 Base (In.): 2 Pkg Qty: 1
The standard U hanger provides flexibility of joist to header installation. Versatile fastener selection with tested allowable loads. 16-gauge galvanized steel. No. U26: Material: Steel Gauge: 16...
The standard U hanger provides flexibility of joist to header installation. Versatile fastener selection with tested allowable loads. 16-gauge galvanized steel. No. U26: Material: Steel Gauge: 16 Joist Size: 2 In. x 6 In. Type: Face Mount Finish: Galvanized Install With: 6-10d or 6-16d in header 4-10dx1-1/2 In. Width (In.): 1.5625 Height (In.): 4.75 Base (In.): 2 Pkg Qty: 1 No. U26-2: Material: Steel Gauge: 16 Joist Size: 2 In. x 6 In. Type: Face Mount Finish: Galvanized Install With: 8-10d or...