Lundmark Mark Thane I Urethane Fortified Acrylic Floor Finish 3293G05 5gal Acry Floor Finish

Detergent-resistant. Black mark-resistant. Slip-resistant. Nonyellowing. Brilliant gloss; versatile. Super high-solids content. Tough; durable. Caution: Keep Out Of Reach Of Children. Keep from freezing. 1 Gallon (3.785 Liters). Lundmark introduces the next generation of floor care products with the introduction of MARK THANE I floor finish. MARK THANE I is a super high-solid acrylic floor seal and finish which has been fortified with a special water borne urethane. This new and unique urethane fortifying system is designed to give you a 1-coat floor finish which has exceptional gloss toughness flexibility extended wear and chemical resistance. MARK THANE I offers substantial savings in time and labor costs and is an extremely versatile product which can be used with excellent results on resident-type floors quarry tile terrazzo concrete sealed wood and cork and nearly any other type of floor. MARK THANE I can be applied in office buildings schools churches warehouses shopping malls hospitals restaurants etc. As a base finish for future spray buffing MARK THANE I is unexcelled. In addition MARK THANE I will withstand repeated burnishings and continue to yield gloss-like appearance time after time. As with other Lundmark finishes MARK THANE I meets or exceeds UL and CSMA standards for slip-resistance (ASTM-D 2047-69). Directions: Initial application: For best results initial application should be made on a dry floor that has been thoroughly stripped and well rinsed. Apply an even coat of MARK THANE I finish with a high-quality strong mop (18-22 oz. works best) or wax applicator which has been rinsed in clear water and wrung nearly dry. Never contaminate finish mops or applicator with cleaners or strippers. 1 coat of MARK THANE I will adequately seal the floor and give excellent gloss. However if flooring is exceptionally porous worn or old then additional protection may be required and a second coat of MARK THANE I is recommended. Allow 30 to 45 minutes between additional coats. Maintenance: Damp mop or sweep daily or as frequently as necessary to keep floor surface clean and free of dust dirt and extraneous matter. When mopping use a neutral free rinsing detergent. Where heavy traffic has abraded finish and reduced lustre a very thin coat of MARK THANE I can be used to restore gloss and add protection. Spray buffing: MARK THANE I provides an excellent base for spray buffing using Lundmark's Spray Buff Compound which will enhance gloss and keep the floor looking its best. Burnishing: MARK THANE I will withstand repeated high-speed burnishings and will give a gloss-like appearance time after time. Stripping: Due to the unique formulation of MARK THANE I it is recommended that Lundmark's Super Strip concentrated floor finish stripper be used to remove the product. 1 gallon of Mark Thane will cover approximately 2500 sq. ft. with 1 coat. No. 3293G01-4: Container Size (Oz.): 128 Product Form: Liquid Coverage Area: 2000 Sq. Ft. Pkg Qty: 1 Package Type: Bottle No. 3293G05: Container Size (Oz.): 640 Product Form: Liquid Coverage Area: 9000-10000 Sq. Ft. Pkg Qty: 1 Package Type: Pail

Lundmark Wax
Model No 3293G05
UPC 084686329358

United States