Hillman Drive Wall Anchor 1/8DS DRIVE WALL ANCHOR

Primarily used in drywall the Drive Wall Anchor is a medium duty fastener for use in drywall plaster and tile. The tip has a drive point to pierce drywall easily; no pre-drilling is required. The two prongs on the head of the shell prevent the anchor from rotating during expansion. When the anchor is fully expanded spider-like legs draw tightly against the backside of the wall. Once the body of the anchor is installed the screw can be changed without disrupting the anchor. No. 5019: Diameter: 1/8 In. X-Short Head Type: Truss Drill Size: 1/4 In. Wall Thickness: 1/8 to 1/4 In. Finish: Zinc Material: Steel Pkg Qty: 2 Package Type: Hang Tag No. 5015: Diameter: 1/8 In. Short Head Type: Truss Drill Size: 1/4 In. Wall Thickness: 3/8 to 1/2 In. Finish: Zinc Material: Steel Pkg Qty: 2 Package Type: Hang Tag No. 41330: Diameter: 1/8 In. Short Head Type: Truss Drill Size: 1/4 In. Wall Thickness: 3/8 to 1/2 In. Finish: Zinc Material: Steel Pkg Qty: 20 Package Type: Hang Tag No. 370033: Diameter: 1/8 In. Short Head Type: Truss Drill Size: 1/4 In. Wall Thickness: 3/8 to 1/2 In. Finish: Zinc Material: Steel Pkg Qty: 100 Package Type: Box No. 5018: Diameter: 1/8 In. Long/Short Head Type: Truss Drill Size: 1/4 In. Wall Thickness: 1/8 to 13/16 In. Finish: Zinc Material: Steel Pkg Qty: 2 Package Type: Hang Tag No. 370036: Diameter: 1/8 In. Long/Short Head Type: Truss Drill Size: 1/4 In. Wall Thickness: 1/8 to 13/16 In. Finish: Zinc Material: Steel Pkg Qty: 100 Package Type: Box

Hillman Fastener Corp
Model No 5015
UPC 008236032215

Taiwan, Province of China